Q-2A manual metallographic abrasive cutter
Main features :
Q-2A Metallographic specimen cutting machine uses a high speed rotating sheet wheel to cut metallographic specimens, which is widely used to cut various metallic materials. It is equipped with cooling device to to take away the heat generated by cutting, thus avoiding the change of the metallographic structure.
Specifications:
Max gross section of cut | 55*55mm |
Grinding wheel size | 300*2*32mm |
Platen speed | 2800r/min |
Electromotor | Y90L-22.2kW 380V 50HZ |
Dimension | 610*560*440 |
Net weight | 80kg |
Q-2A metallographic sample cutting machine maintenance and safety operation technology
1, when the cutting load should be uniform, not too hard, so as not to damage the grinding wheel piece;
2, Q-2A metallographic sample cutting machine working power for the exchange of 380V, the grounding device should be very reliable;
3, no long-term overload protection and short circuit protection device, the user to install the automatic air switch on the power supply to the motor for long-term overload protection and short circuit protection;
4, after long-term use, should be promptly replaced Q-2A metallographic sample cutting machine motor grease;
5, must use the anti rust coolant, cutting the cooling lubricant is a bactericidal, anti rust effect;
6, in time to clean up the bottom of the water tank sediment, rust proof.
